AquaPur® provides clean process water, economically and up to 600 washes without chemicals.

• The quality of the water obtained complies with the requirements for car washing and excess water disposal in every aspect
• High filter capacity of 4 m³/hour
• Virtually 100% water recover
• Up to 600 washes without chemicals
• Compact design
• Ideal for small machine rooms
• Easy to operate

AquaPur® – simple, economical.

• The water flows through the filter from top to bottom. All dirt particles are retained there in the quartz gravel.
• The filtered water flows immediately into the storage tank.
• The system cleans itself through the reverse flow process. Water is pumped through the filter from the bottom to the top. Return flow water and the initial filtrate are passed into the sedimentation tank for sedimentation.

• After the silt trap, the waste water flows into a storage tank with aeration system which reliably prevents odours.
• The precleaned water is pumped into the filter.
• In the filter operation, the water flows through one fine and one coarse gravel layer.
• The cleaned water flows into the process water tank.
• From the storage tank, the water is pumped into the car wash.
• Water that is not required for use is returned to the circulation pipes.
  Excess water is disposed of by discharging it into the drains.
  

With AquaPur, you're also benefiting from WashTec's easy and economic possibilities in the area of water recovery.

 back to : water recovery